
Many operations undertaken by the emergency services take place in darkness and bad weather conditions which impact vision. Rain, fog, hail and snow all impair vision. In addition, smoke from burning houses or vehicles as well as rescue activities cause stress. Good illumination of at the scene of the emergency is of utmost importance and it supports the responders in their dangerous work.
It is essential to find the right balance between too much lighting and too poor lighting on an emergency vehicle. Too much lighting can lead to undesired effects, such as reflections and blinding of people close to the place of the incident. Too poor lighting can cause accidents. The key to success is even lighting at the place of accident and optimal light distribution.
LED SCENE LIGHTING
Fire Fighting Vehicles & Power
Generators
1323 LED work light is a powerful product that enables a wide illumination of the place of the accident. This scene lighting can be mounted on the mast of fire fighting vehicles as well as on power generators. It has a colour temperature of 4000 K, an even light distribution and is available both with symmetric and wide symmetric light pattern. 16500 effective lumen, 4,7 kg, only 150 W. Voltage range of 18 to 32 V and 230 V.
LED SCENE LIGHTING
Other vehicles
Equipped with vibration dampers, the 1010 can be mounted on the mast, but also on the basket, on the roof or under the windshield of large fire fighting vehicles.
LED SCENE LIGHTING
For baskets
This basket is equipped with TYRI’s 1010 LED work lights which are mounted in a position to illuminate straight forward at the house walls as well as downwards to illuminate the area on the ground.
DESIGN MATTERS
The VL4 and VL6 with its stylish streamline design and small dimensions are used on firefighting vehicles and ambulances as well as other mobile machinery. The oblong design enables incorporation in the vehicle’s design. Available with thru bolt or bracket mount, different lumen outputs and voltage ranges.
SPECIALIST LIGHTING
Some LED work lights lend themselves for use in special tasks. The 1010 WhitePoint was developed for fire monitors but can also be used as a search light. Mounted next to the fire monitor it has the advantage that the light is directed in a way that the light rays do not mix with water.
Historias
LA GRAN GUÍA
LA IMPORTANCIA DE LAS PRUEBAS Y HOMOLOGACIONES
Pruebas y certificaciones para maquinaria pesada
CLASE CEM EN55025/CISPR25
Es de vital importancia, especialmente en vehículos de emergencias y militares, que la iluminación no afecte los sistemas de control, camaras, ordenadores de abordo y otros equipos sensibles a interferencias de radio. Por este motivo las luces de TYRI son específicamente controladas para que no provoquen ningún tipo de interferencia electromagnética.
IP 69K
La clasificación IP69 ofrece la tranquilidad de saber que la luz de trabajo que estas instalando y superado rigurosas prubas para asegurar que sea resistente y que cumple con los más estrictos estándares de protección contra el agua, humedad e infiltraciones de polvo.
Pruebas de vibración
Las luces TYRI pasan por un extenso test de vibración de hasta 8 horas en todos los ejes, sobre 10 Grms en un rango de frecuencias de 5 – 2000 HZ. Esto simula las fuerzas a las que las luces son sometidas una vez instaladas en los vehículos de fuera de caretera.
Pruebas de niebla salina
Las luces TYRI pasan por un extenso test de niebla salina para asegurar que cumplen con los estándars ASTMB117. Esto asegura el correcto funcionamiento de las luces hasta en ambientes corrosivos.
Pruebas de choque
Además de las pruebas de vibración las luces TYRI superan prubas de choque con una fuerza de hasta 50 G. Esto asegura que las luces TYRI superaran los rigores de su ambiente de trabajo.
Pruebas medioambientales.
Las luces TYRI son probadas en altas y bajas temperaturas así como en condiciones de humedad durante un mínimo de 50 días. Las pruebas se conducen de -40 °C to 85 °C y hasta un 90 % de humedad.
Polaridad / Sobrecalentamiento / Protención de sobrevoltaje
Las luces TYRI llevan incorporado un circuito sensor de temperatura que regula el output para reducir la temperatura de la lámpara en caso de sobrecalentamiento. Esto previene daños en los LED que pueden resultar en fallos permanentes. Las luces TYRI también llevan un protector de polaridad en caso de una incorrecta instalación. Si los cables fuesen intercambiados durante la instalación, las luces TYRI no se encenderían hasta que no fuesen conectados de forma correcta. Así se protegen los LED y los circuitos.