SUPPORT

THANK YOU FOR CHOOSING INTELLilight

INTELLilight is the most modern work lighting system in the world. It is fully adjustable after your preferences. You can easily group/re-group, dim, adjust colour temperature, create individualised profiles and more – all just a button away.

INTELLilight is made to be user friendly. Still you might need some assistance and that is why this page is here for you.

FAQ – FIND YOUR ANSWER HERE

If you only want to control meshes, you do not need an account – simply ask someone who has access to the mesh for the share code and enter it by opening the navigation drawer and tapping “Add mesh” → “Access mesh using code”.

If you want to setup, edit, and manage meshes, you’ll need to create an account.

A mesh is a network of Bluetooth devices that you can control wirelessly. In this case, the mesh consists of your wirelessly connected INTELLilight products.

To set up a new mesh:
• Log in or create an account if you don’t have one
• Open the navigation drawer by tapping the menu icon in the upper left corner
• Tap “Add mesh”
• Type in a name for your mesh and tap “Setup”
• Follow the in-app instructions for adding devices

To add a mesh with a code:
• Open the navigation drawer by tapping the menu icon in the upper left corner
• Tap “Add mesh”
• Tap “Access mesh using code”
• Fill in the configuration code that you have received from someone that uses the mesh

Controlling lights with the app:
Turn lights on and off by tapping the toggle button on the right side of a group or individual light.
By tapping on a group or light row, a bottom sheet drawer opens allowing you to choose colour temperature and brightness.

Controlling lights with the remote:
The remote allows you to control all lights at once, or individually control up to 4 groups of lights that can be set up in the app. The power button in the top left corner of the remote is used to control all lights.

Turning lights on/off:
• On: turn a group on by pressing the group button once.
• Off: turn a group off by pressing and holding the group button until the group turns off.

Examples:
• Turn all lights off by pressing and holding the power button.
• Turn on the “front” group by pressing the top group button once.

Changing colour temperature and brightness:
To affect the colour temperature or brightness of a group, first select the group you’d like to change by pressing its button once, then press the colour temperature or brightness buttons to set the lights accordingly.

Examples:
• Turn down the brightness of the “back” group by pressing the bottom group button once, then pressing the brightness down button until you reach your desired brightness.
• To affect all lights, press the power button once before changing brightness and colour temperature.

  • Select the mesh you want to share in the navigation drawer
  • Tap the share icon in the top right of the navigation bar

Share the code that appears with the person you want to be able to control the mesh

If a device is not responding even after trying the steps in “Why can’t I connect to my mesh”, it may need to be factory reset. Factory reset should be used as a last resort.

Factory Resetting a Light

  • Open the navigation drawer in the upper left corner by clicking on the hamburger menu
  • Tap “Support & Troubleshoot”
  • Tap “Factory Reset”
  • Choose “Light” as device you want to reset
  • Enter the device ID that is found on the backside between the fins
  • Tap “Search” button
  • Once the light is found, confirm the reset by tapping “Factory Reset”

Factory Resetting a Remote

Open the navigation drawer in the upper left corner by clicking on the hamburger menu

  • Tap “Support & Troubleshoot”
  • Tap “Factory Reset”
  • Choose “Remote” as device you want to reset
  • Hold and press both brightness buttons at the same time. This will put the remote into configuration mode for 3 minutes.
  • Enter the device ID that is found on the underside of the battery lid
  • Tap “Search” button
  • The app should find the remote and you confirm the reset by tapping “Factory Reset”

iOS: An iPhone running iOS 15.0 and above is required.

Android 8.0 and up is supported, but due to the varying hardware it is hard to ensure compatibility with all devices.

First, make sure the lights are powered on and nearby.

If you are still unable to connect, try the following one at a time:

  • Turn your device’s Bluetooth off and then back on
  • Close and reopen the INTELLilight app
  • Restart your mobile device

Turn off power to your INTELLilight devices, then turn back on. This may mean turning off and restarting the vehicle they’re connected to.

First, follow the steps in “Why can’t I connect to my mesh?”.

If you’re still unable to find the light, you might need to factory reset the light. See “How do I factory reset a device?”

Make sure the remote is in configuration mode. Press and hold both brightness buttons at the same time. This will put the remote into configuration mode for 3 minutes.

If you still can’t find the remote, try disabling and re-enabling Bluetooth on your device. If the remote still doesn’t appear, you might need to factory reset it. See “How do I factory reset a device?”

THE GAME CHANGER

INTELLilight

Man and machine. Sweat and precision. Often going against the toughest elements nature can throw at them.

Derived from the needs and demands of a new generation of operators and after considerable development and testing, the sophisticated INTELLilight™ system is finally here. Ready to meet the demands of tomorrow.

LEARN AND EXPLORE

TYRI LIGHT ACADEMY

Education, insights, tips, updates and industry trends for work lighting in off highway vehicle manufacture and aftermarket.

WATCH

WEBINARS ON DEMAND

Never miss a TYRI webinar, register to view our Webinars on demand service and keep up to date with news about latest innovations and learn about the latest lighting technology and industry secrets!

1010

TYRI’s most popular model

Mining & Military grade

High-powered with output of up to 4600 efffective lumens

Vibration dampeners are standard helping minimize vibration and shock

A great off-road driving light


Image gallery here...


0909

The 0909 is a cost-effective option for off-road driving lights.

Available with 1400 or 1850 effective lumens and specialized light patterns perfect for task/work lighting.


Image gallery here...


0606

The 0606 model is a 1000 effective Lumen light - powerful for its size & perfect for confined spaces.

The 0606 can be mounted on the A-pillars, mirrors, underneath for rock lighting or on the rear bumper for back-up lights.


Image gallery here...